منو کاربری

ارسال مطلب ویرایش پروفایل پنل کاربری صندوق پیام ارسال پیام پیام های ارسال شده تالار گفتمان خروج

CUSTOMIZE PARAMETERS

 

CUSTOMIZE PARAMETERS


 

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

 

 

HINT:
The following items can be customized.

 

 

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

 

  1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
     

    Tilt & Telescopic 
    Display Default Contents Setting
    Autoaway/Return function ON Turn the auto away/return function ON/OFF ON or OFF

  2. TOYOTA PARKING ASSIST-SENSOR SYSTEM (for 8 Sensor Type)
     

    1. Using intelligent tester
       

      Warning 
      Display Default Content Setting
      Rr Sensor Onset Range Wide Set the buzzer activation range for the rear center sensors. Narrow or Wide
      1. Narrow: 600 mm (23.62 in.)
      2. Wide: 1500 mm (59.06 in.)
      Keep Sense Buzzer Avail Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail
      1. Not Avail: Not Available
      2. Avail: Available
      Fr & Rr Buzzer Volume M2 Change the buzzer volume setting. L, M1, M2, M3 or H
      1. L: Low volume
      2. M1: Medium low volume
      3. M2: Medium volume
      4. M3: Medium high volume
      5. H: High volume

       

      Sensor 
      Display Default Content Setting
      Sensor Condition N Avail Make the front sensors available when the shift lever is in N. Not Avail or Avail
      1. Not Avail: Not Available
      2. Avail: Available
      Reverse Range Front Sensor F Change the operation setting for the front sensors when the shift lever is in R. F or F Stop
      1. F: Front sensors are available
      2. F Stop: Front sensors are not available
      Non P/R Range Rear Sensor R Stop Change the operation setting for the rear sensors when the shift lever is in any position except P or R. R, Rcrn or R Stop
      1. R: All rear sensors are available
      2. Rcrn: Rear corner sensors are available
      3. R Stop: All rear sensors are not available

       

      Display 
      Display Default Content Setting
      Display Mode All The display mode setting (when the TOYOTA parking assist-sensor system is normal). All or Undisp

    2. On Display and Navigation Module Display or Accessory Meter

       

      NOTICE:
      1. When the customer requests a change in a function, first make sure that the function can be customized.
      2. Be sure to make a note of the current settings before customizing.
      3. When troubleshooting a function, first make sure that the function is set to the default setting.

       

      1. Turn the ignition switch to ON.
      2. Turn the TOYOTA parking assist-sensor system on.
      3. Select the following menus: Setup / Vehicle / TOYOTA park assist.
      4. Select the setting by referring to the table below.

        Display Default Content Setting
        Alert volume 3 Change the buzzer volume setting. 1, 2, 3, 4 or 5
        1. 1: Low volume
        2. 2: Medium low volume
        3. 3: Medium volume
        4. 4: Medium high volume
        5. 5: High volume
        Display On The display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
        Distance Wide Set the buzzer activation range for the rear center sensors. Narrow or Wide
        1. Narrow: 600 mm (23.62 in.)
        2. Wide: 1500 mm (59.06 in.)

       

     

  3. POWER DOOR LOCK CONTROL SYSTEM
     

    Door Lock 
    Display Default Content Setting
    Unlock Key Twice OFF Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF
    Auto Lock* ON Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
    Auto Lock/Shift* OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF
    Auto Unlock/Shift* OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. ON or OFF
    All Unlock/Open-Close* OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off. ON or OFF
    1. *: w/ Collision door lock release function

     

  4. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)
     

    Wireless Door Lock 
    Display (item) Default Function Setting
    Wireless Control ON The function that turns the wireless door lock on or off. ON or OFF
    Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
    Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF
    Unlock 2 Operation OFF The function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock. ON or OFF
    Auto Lock Time 30 s The function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s or 120 s
    Wireless Buzzer Resp*1 ON This function turns the wireless door lock buzzer response on or off. ON or OFF
    Wireless Glass Hatch Open*2 Long1 The function of changing the operation method of opening the glass hatch by the transmitter. 1tim ON/2tim ON/Long1/Long2 or Prohibit
    P/W Ope buzzer ON This function turns the wireless power window buzzer response on or off. ON or OFF
    Wireless Buzzer Vol*1 Level7 This function changes the wireless door lock buzzer Volume. Level7/Level6/Level5/Level4/Level3/Level2/Level1 or Level0
    1. *1 w/ Wireless Buzzer Answer-back
    2. *2: w/ Glass Hatch Opener System

     

  5. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
     

    Wireless Door Lock 
    Display (item) Default Function Setting
    Wireless Control ON The function that turns the wireless door lock on or off. ON or OFF
    Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
    Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF
    Unlock 2 Operation OFF The function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock. ON or OFF
    Auto Lock Time 30 s The function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s or 120 s
    Wireless Buzzer Resp*1 ON This function turns the wireless door lock buzzer response on or off. ON or OFF
    Wireless Glass Hatch Open*2 Long1 The function of changing the operation method of opening the glass hatch by the transmitter. 1tim ON/2tim ON/Long1/Long2 or Prohibit
    P/W Ope buzzer ON This function turns the wireless power window buzzer response on or off. ON or OFF
    Wireless Buzzer Vol*1 Level7 This function changes the wireless door lock buzzer Volume. Level7/Level6/Level5/Level4/Level3/Level2/Level1 or Level0
    1. *1 w/ Wireless Buzzer Answer-back
    2. *2: w/ Glass Hatch Opener System

     

  6. ENTRY AND START SYSTEM (for Entry Function)
     

    Entry&Start 
    Display Default Contents Setting
    Park Wait Time (Waiting time to permit unlocking door after locking) 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s or 5s
    Ignition Available Area
    (Entry ignition available area)    		 All Function to choose the available area for the key to start the engine and cancel the steering lock. Front or All
    Glass Hatch Open Operation ON Function to permit opening the Glass Hatch with the electronic key. ON or OFF

     

    Warning 
    Display Default Contents Setting
    Key Low Battery Warning (Warn when key battery becomes weak) ON Function that warns the driver that the key battery power is low. ON or OFF

     

    1. ENTRY UNLOCK MODE SWITCHING FUNCTION

      1. To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.
        When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.

         

        NOTICE:
        After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

         

        1. All door unlock mode (default):
          When a touch sensor is touched, all the doors unlock.
        2. Driver door unlock mode:
          When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.
      2. The certification ECU receives this signal from the key and changes the smart key system to the appropriate entry unlock mode.
      3. The certification ECU sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

        Mode Wireless Door Lock Buzzer Combination Meter Assembly (Buzzer)
        All Doors
        (Default)        		 Sounds 2 times Sounds once
        Driver Door
        (Customized)        		 Sounds 3 times Sounds once

         

        HINT:
        The function only changes the entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.

         

       

    2. KEY CANCEL
      The key cancel operation disables the following functions:

      1. Entry Unlock/Lock
      2. Key Lock-in Prevention
      3. Entry Back Door Open
      4. Entry Glass Hatch Open (w/ Glass Hatch Opener System)
      5. Warning
      6. Entry Ignition
      7. Memory Call (w/ Memory)
        1. The operation procedures are as follows:
          Precondition:
          Engine switch off, driver side door closed and unlocked.
          1. Unlock the driver side door once with the unlock switch of the key.
          2. Open the driver door within 5 seconds.
          3. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
          4. Close and open the driver door twice within 30 seconds.
            ((Driver door: Open condition → Close → Open → Close → Open)
          5. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
          6. Close and open the driver door once within 30 seconds.
            (Driver door: Open condition → Close → Open)
          7. Close the driver door within 5 seconds.
            When key cancel is activated, the wireless door lock buzzer sounds twice.
            To return to the original condition, perform the procedure again. When the original condition is restored, the wireless door lock buzzer sounds once.

       

     

  7. THEFT DETERRENT SYSTEM
     

    Security 
    Display Default Contents Setting
    Intrusion Win Opened* OFF Function to change the intrusion windows opened ON or OFF
    1. *: w/ Intrusion Sensor

     

  8. LIGHTING SYSTEM (for Interior)
     

    Illuminated Entry 
    Tester Display Default Content Setting
    Lighting Time 15 s Changes the lighting time after closing all of the doors (the lights will fade out immediately when turning the ignition switch from off to ACC or ON). 7.5 s, 15 s or 30 s
    I/L when ACC OFF ON This function turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR). ON or OFF
    I/L ON W/Door Key Unlock*2 ON This function turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR). ON or OFF
    Light Control ON This function controls the interior foot lights, inside handle illumination, ornament illumination and door pocket illumination. ON or OFF
    Room Light when Aprchd*1 ON This function turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR). ON or OFF
    Inside Foot Light*3 ON This function controls the interior foot lights. ON or OFF
    Center Console Spot Light ON Lights up the center console spot light when the ignition switch is turned to ACC or ON. ON or OFF
    Mirror Foot Light Time*4 15 s Side step light illumination duration. 0 s, 7.5 s, 15 s or 30 s
    Interior Light Control ON This function controls the interior lights. ON or OFF
    Exterior Light Control*4 ON This function controls the side step lights. ON or OFF
    Scuff Plate Lamp linked to Entry & Start*4 ON This function turns on the side step light when the key is brought within the vehicle exterior detection area. ON or OFF
    Scuff Plate Lamp linked to Wireless Key*4 ON This function turns on the side step light when the door is unlocked with the wireless key. ON or OFF
    Scuff Plate Lamp linked to D-Door Unlock SW*4 ON This function turns on the side step light when the door is unlocked with the manual unlock switch. ON or OFF
    Scuff Plate Lamp linked to Door open*4 ON This function turns on the side step light when the driver door is opened. ON or OFF
    1. *1: w/ Entry and Start System
    2. *2: w/o Entry and Start System
    3. *3: w/ Interior Foot Light
    4. *4: w/ Side Step Light

     

  9. METER / GAUGE SYSTEM
     

    Warning 
    Tester Display Default Content Setting
    Language Language of Destination Function to change language of display Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd or Russian
    Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
    Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
    1. *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

    Display 
    Tester Display Default Content Setting
    ECO Drive Indicator ON Function to turn on/off the ECO driving indicator zone display in the multi-information display ON or OFF

     

  10. SEAT BELT WARNING SYSTEM
     

    Seat Belt Warning 
    Display Default Contents Setting
    Driver Side Seatbelt Warning Buzzer ON If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF
    Front Passenger Side Seatbelt Warning Buzzer ON If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF

  11. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
     

    Air Conditioner 
    Display Default Contents Setting
    Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C or -2 C
    Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Automatic or Manual
    Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic or Manual
    Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON or OFF
    Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON or OFF
    Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow. ON or OFF

  12. POWER WINDOW CONTROL SYSTEM
     

    Power Window 
    Tester Display Default Content Setting
    Door Key Linked P/W Up OFF This function is used to close the windows by operating the mechanical key. ON or OFF
    Door Key Linked P/W Down OFF This function is used to open the windows by operating the mechanical key. ON or OFF
    P/W Up w/ Transmitter OFF This function is used to close the windows using the wireless key transmitter. ON or OFF
    P/W Down w/ Transmitter OFF This function is used to open the windows using the wireless key transmitter. ON or OFF

  13. SLIDING ROOF SYSTEM
     

    Slide Roof 
    Display Default Contents Setting
    Door Key Related Open*1 ON The function to manually open the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. ON or OFF
    Door Key Related Close*1 ON The function to manually close the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the lock position when the ignition switch is off. ON or OFF
    Wireless Key Related Open*2 ON The function to manually open the sliding roof linked with the power windows by pressing the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. ON or OFF
    Wireless Key Related Close*2 ON The function to manually close the sliding roof linked with the power windows by pressing the transmitter LOCK switch for 1.5 seconds or more when the ignition switch is off. ON or OFF
    Door Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. Slide or Tilt
    Wireless Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by pressing on the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. Slide or Tilt

     

    HINT:
    1. *1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.
    2. *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.

     

     

  14. LIGHTING SYSTEM (for Exterior)
     

    Light Control 
    Display Default Content Setting
    Response Time Normal Changes the delay timing of illuminating the taillights when going into a tunnel when the headlight dimmer switch is in the AUTO position. Long or Normal
    Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*1 Light2, Light1, Normal, Dark1 or Dark2
    Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, the A/C indicator light and clock.*2 Light2, Light1, Normal, Dark1 or Dark2
    Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, the A/C indicator light and clock.*3 Light2, Light1, Normal, Dark1 or Dark2
    Light Auto OFF Delay 30s Function to continue illuminating headlights the continue illuminating headlights for a certain period of time after closing all the doors with the ignition switch turned from ON to off under the condition that the headlight dimmer switch is in the head or AUTO position with the continue illuminating headlights on. OFF, 30s, 60s or 90s

     

    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

     


    *1 
    Lighting Brightness

    E107164
    Setting Dark2 Dark1 Normal Light1 Light2

    *2 
    Brightness setting for lowering the lights

    E107164
    Setting Dark2 Dark1 Normal Light1 Light2

    *3 
    Brightness setting for canceling the lowering of the lights

    E107164
    Setting Dark2 Dark1 Normal Light1 Light2

     









 

مطالب مرتبط


بخش نظرات این مطلب

آخرین نظرات ثبت شده برای این مطلب را در زیر می بینید:

بخش نظرات برای پاسخ به سوالات و یا اظهار نظرات و حمایت های شما در مورد مطلب جاری است.
پس به همین دلیل ازتون ممنون میشیم که سوالات غیرمرتبط با این مطلب را در انجمن های سایت مطرح کنید . در بخش نظرات فقط سوالات مرتبط با مطلب پاسخ داده خواهد شد .

شما نیز نظری برای این مطلب ارسال نمایید:



💬 نظرات کاربران
نظر خصوصی
💬ثبت نام کاربران
💬ورود کاربران